Product Details:
Measuring Range | 0 - 1250 um |
Accuracy | 1 % of reading |
Resolution | 0.1 um |
Minimum Measurement Area | 7 mm |
Power Supply | 3 x 1.5V AA batteries |
Display Type | Digital |
Packaging Type | Box |
Country of Origin | Made in India |
Features:
• Non-magnetic coatings(e.g. paint, zinc)on steel
• Insulating coatings(e.g. paint)on no-ferrous metals
• No-ferrous metals coatings on insulating substrates
• Menu operation system
• Two measuring mode: CONTINUE and SINGLE mode
• Two working Mode: DIRECT and GROUP mode
• Statistic Display: AVG, MAX, MIN, NO., S.DEV
• One point calibrating, two points calibrating and basic calibrating easily
• Memory for 400 readings(80 DIRECT and 320 GROUP readings)
• Delete single readings and all group readings easily
• High alarm and Low alarm for all working mode
• Low battery, error indication
• USB interface for PC software(windows 98/2000/xp/vista)
Specification:
Sensor probe | F | N |
Working principle | magnetic induction | Eddy current principle |
Measuring range | 0~1250um | 0~1250um |
Guaranteed tolerance(of reading) | (+/- 3%+1)um | (+/- 3%+1.5)um |
Low range Precision | 0.1um | 0.1um |
Minimum curvature radius | 1.5mm | 3mm |
Diameter of Minimum area | 3mm | 5mm |
Basic critical thickness | 0.5mm | 0.3mm |
Size(HxWxD) | 113.5mm x 54mm x 27mm | |
Weight | 110g |
Accessories:
Two “AAA” Batteries, USB cable, Software, Calibration Iron, Calibration Aluminium, Precision Standards & Carrying Case.
Product Details:
Type | NF |
Measuring Range | 0 - 1250 um |
Accuracy | 1 % of reading |
Resolution | 1 um |
Minimum Measurement Area | 5 mm |
Minimum Sample Thickness | 0.2 mm |
Color | Black |
Weight | 0.45 gm |
Country of Origin | Made in India |
Pencil type universal coating gauge, pull gauge for checking any non-magnetic coatings on steel surfaces. Range 0-500 microns with locking system. Checks coatings at any angle
Product Details:
Material | Stainless Steel |
Surface Finish | Polished |
Shape | Rectangle |
Gauge Size | 176 x 66 x 14 mm |
Scraper Size | 86 x 41 mm |
Number of Grooves | 1 |
Country of Origin | Made in India |
One of the important parameter in paint evaluation is Fineness of Grind Gauge (Hegman Gauge) is a precision gauge manufactured from hardened stainless steel and has two ground channels giving scales of both Microns and Hegman.
Supplied complete with scraper blade. Three models are available 0 to 25 micron, 0 to 50 micron, 0 to 100 micron.
This gauge is used for the checking of particle size in paint or inks and also a wide range of ancillary products i.e. Dyes, Talcum, Flour, and Chemicals etc.
In operation the paint / ink samples are placed into the top end of the gauge and then drawn down using the scraper blade.
The measurement of either Microns or Hegman can be made where the coarse particles have been screened out
Associated standards are: ISO 1524, BS3900: C6, DIN 53-203, ASTM D1210, ASTM D1316, ASTM D333.
One of the important parameter in paint evaluation is fineness of grind gauge (hegman gauge) is a precision gauge manufactured from hardened stainless steel and has two ground channels giving scales of both microns and hegman.
Supplied complete with scraper blade. Three models are available 0 to 10 micron, 0 to 25 micron, 0 to 50 micron, 0 to 100 micron.
This Hegman Gauge is used for the checking of particle size in paint or inks and also a wide range of ancillary products i. E. Dyes, talcum, flour, and chemicals etc. In operation the paint / ink samples are placed into the top end of the gauge and then drawn down using the scraper blade. The measurement of either microns or hegman can be made where the coarse particles have been screened out
associated standards are: iso 1524, bs3900: c6, din 53-203, astm d1210, astm d1316, astm d333.
Competitive Advantages of the product
Fineness of Grinding Gauge Double Channel Type. Supplied with Scrapper, Operation Manual.
Range : 0 – 100 microns (0 to 8 Hegman)
Range : 0 – 50 microns (4 to 8 Hegman Scale)
Range : 0 – 25 microns (6 to 8 Hegman Scale)
Product Details:
Measuring Range | 0 to 1000 um |
Accuracy | 5 % |
Shape | Round |
Material | Stainless Steel |
Brand | Elcometer |
Packaging Type | Box |
Material Grade | SS 316 |
Pattern | Printed |
Country of Origin | Made in India |
Wet Film Wheels consists of three circles. The middle circle is of smaller diameter and is eccentric of the two outer circles. By rolling the gauge through a wet coating, the center disc eventually touches the film. This point on the scale indicates the thickness. If the volume to solids ratio of the coating is known, then the wet film thickness can be used to predict the dry film thickness. Various measurement ranges are available from 0 to 100µm to 0 to 2000µm are available. It has continuous scale results in ±5% measurement accuracy and suitable for both flat and curved surfaces. Stainless steel giving a hard-wearing instrument which can be cleaned with solvents for reuse and used for important measurements. | ||
|
Ranges of Stainless Steel Wet Film Wheels are:-
1) Range from 0 to 100µm Wheel
2) Range from 0 to 300µm Wheel
3) Range from 0 to 500 µm Wheel
4) Range from 0 to 1000µm Wheel
5) Range from 0 to 2000µm Wheel
Product Details:
Packaging Type | Box |
Accuracy | +/-1% |
Operating Mode | Manual |
Brand | Elcometer |
Temperature | 50 Degree Celsius |
Country of Origin | Made in India |
Cross Hatch Cutter for adhesion tests provides an instant assessment of the quality of the bond to the substrate. Due to its rugged construction this cross hatch gauge is ideal for thin, thick or tough coatings on all surfaces. An ideal field or laboratory test.
Product Details:
Measuring Range | 20 to 370 um |
Shape | Hexagonal |
Material | Stainless Steel |
Brand | TQC |
Model Name / Number | WG-1 |
Thickness | 2 mm |
Country of Origin | Made in India |
Hexagonal/Octagonal precision measuring comb made of heavy stainless steel. The high- grade stainless steel will not be affected by acid or base elements. Models available for several different applications:
Product Details:
Packaging Type | Box |
Display Type | Digital |
Resolution | 0.01 MPa (1 psi) |
Accuracy | +/- 1% Full Scale |
Range | 0.7 - 20 MPa, 100 - 3000 psi |
Cutting Tool | 20 mm Hole Saw |
Country of Origin | Made in India |
Product Details:
Measuring Range | 25 to 3000 um |
Accuracy | 5 % |
Shape | Hexagonal |
Material | Stainless Steel |
Brand | Elcometer |
Model Name / Number | 112 |
Additional Information:
Product Details:
Measuring Range | 0 to 1000 um |
Accuracy | 5 % |
Shape | Triangular |
Color | Black and Silver |
Material | Stainless Steel |
Surface Finish | Polished |
Country of Origin | Made in India |
Product Details:
Material | Stainless Steel |
Packaging Type | Box |
Surface Finish | Polished |
Operating Mode | Manual |
Total Weight | 350 gm Approx |
Country of Origin | Made in India |
The Cross Hatch Cutter Economy type facilitates the assessment of the adhesion resistance of coatings to separation from substrates when a right-angled lattice pattern is cut into the coating and penetrates through to the substrate. The tests conducted through these Cross Hatch Cutter are preferred to assess the adhesion of paint coatings.
Other Details:
Product Details:
Measuring Range | 25 to 3000 um |
Accuracy | 0.1 % |
Shape | Rectangle |
Material | Stainless Steel |
Pattern | Printed |
Thickness | 2 mm |
Country of Origin | Made in India |
Range : 25 to 2032 microns scale on all 4sides of gauge of aluminum. Wet film comb USA stainless steel range 25 to 3000 microns
Product Details:
Material | Stainless Steel |
Usage/Application | Industrial |
Warranty | 6 Months |
Finished | Polished |
Packaging Type | Box |
No of Tool | 4 Tool |
Operating Mode | Manual |
Country of Origin | Made in India |
A Complete Cross Hatch Cutter Kit, which are in compliance of BS EN ISO 2409 / BS 3900 E6 / ASTM D3359 methods of measurement. Our Cross Hatch Cutter Kit facilitates the assessment of the adhesion resistance of coatings to separation from substrates when a right-angled lattice pattern is cut into the coating and penetrates through to the substrate. The tests conducted through these Cross Hatch Cutter Kits are preferred to assess the adhesion of paint coatings. The kit is equipped with multiple cutters of 1, 2 and 3mm spaces between the cutting edges. It has an advantage over the single cutting blade, thus render both safety and simplicity in use.
Kit includes:-