Product Details:
Packaging Type | Box |
Material | Plastic |
Color | Black |
Display Type | Digital |
Shape | Rectangle |
Weight | 292gm |
Frequency | 50 Hz |
Power Souce | Battery |
Voltage | 210 V |
IP Rating | IP33 |
Operating Humidity | 0~85% R.H |
Country of Origin | Made in India |
Applications:
Product Details:
Wavelength Range | 400-680 nm |
Mobility | Portable |
Voltage | 210 V |
Packaging Type | Box |
Body Material | MS |
IP Rating | IP56 |
Power Source | Battery |
Country of Origin | Made in India |
Product Details:
Display Type | Digital |
Automation Grade | Automatic |
Voltage | 210 V |
Frequency | 50 Hz |
Measuring Direction | 360 Degree |
Power Source | Battery |
Model No | TH - 170 |
Hardness Scales | HLD, HB, HRC, HRB, HV, HS |
Country of Origin | Made in India |
Product Details:
Power Source | Battery |
Material Grade | SS 316 |
IP Rating | IP33 |
Packaging Type | Box |
Material | Stainless Steel |
Country of Origin | Made in India |
Surface Profile Comparator for Sand, Shot and Grit Blasting Model 127 Keane Tator USA determines anchor pattern depth, 5 segments each 12.5, 25, 50, 75 & 100 Microns in each disc Surface Comparator UK Make.
1) Grit blasting 4 segments
2) Shot blasting 4 segments
Product Details:
Tape Width | 1 Inch |
Tape Length | 10 m |
Pack Size | 4.5 ml |
Brand | HT X-Coarse |
Packaging Type | Box |
Country of Origin | Made in India |
Elcometer U.K. 122 Testex Tapes provides a quick, easy to use low cost method of measuring rough surface profiles after shot or grit blasting. Used in conjunction with the tape gives peak to valley height. This method enables a replica of the anchor pattern profile to be produced, which can then be attached to a report, to provide a permanent record for future reference
Use it By placing the tape on the surface and rubbing over it, the Rt (total roughness) or peak-to-valley height of the profile can be taken and then measured with a film thickness meter.
1. Tape consists of a layer of compressible foam affixed to an incompressible polyester substrate.
2. When pressed against a roughened/grit blasted (steel) surface, the foam collapses acquiring an impression of the surface.
3. Placing the compressed tape between the anvils of the micro metric thickness gauge, and subtracting the contribution of the incompressible substrate (50 micrometers or 0.002 inches), gives a measure of the surface profile
Product Details:
Surface Finish | Polished |
Shape | Square |
Thickness | 5 mm |
Color | Silver |
Packaging Type | Box |
Country of Origin | Made in India |
Product Details:
Display Type | Digital |
Power Source | Battery |
Pressure Range (Upto) | 25 Bar |
Pointer Material | Aluminium Black |
Operating Mode | Manual |
Voltage | 210 V |
IP Rating | IP33 |
Packaging Type | Box |
This digital thickness gauge is lightweight and easy to use. It features a large, easy to read LCD display and is durabe.
•Made of extra Steel & strong fiber composites
•8mm LCD display
•Measuring range: 0-12.7mm
•Resolution: 0.01mm
•Accuracy: Plus or minus 0.01mm
•Measures thickness of paper, film, wire, sheet, jewelry, leather and more
•Power source: 1 SR44 battery with 12 months life (included)
•Measurements: Approx. .4/5"W x 4-1/8"L x 2-1/5"H
Product Details:
Usage/Application | Measurement |
Body Material | Metal |
Display | Digital |
Packaging Type | Box |
Power Source | Battery |
IP Rating | IP56 |
Operating Mode | Manual |
Voltage | 210 V |
Country of Origin | Made in India |
The looks of a digital tape measure is identical to the standard measures.
These are ideal for measuring the places inside a construction place. When you pull the tape out from the casing, the tape will start working automatically
This makes your work easy and convenient as all you need to do for reading the measurements is to read the information displayed on the screen. You just have to hold the measure in place and the tool does the rest. Another very interesting characteristic of this tool is its capability of triangulating the dimensions. If you try to calculate these details with standard measures, then it will be very hard in normal situation.
Large detailed LCD display for easy read out
Measures dimensions in Centimeters
'Hold' function can lock the last measured value
Operates on one single battery only
Automatic shut-off function if not used for 5 minutes
Battery low indicator
Specifications
Accuracy ± 1mm
Measuring range 0 - 5 meters
Measuring units m
Operating temperature -5 - 50 °C
Power supply (battery) 1 x AA / 1,5V
Storage temperature - 20 - 85 °C
Switch off automatic after ± 5 min.
Weight 0.23 kg
Inside and outside measurement possible
Large LCD display for easy read-out
Width of 19mm For Easy Manual Viewing
Metal belt clip
Product Details:
Dial Size | 1.5 inch / 40 mm |
Display Type | Analog |
Pressure Type | Absolute Pressure |
Material | Mild Steel |
Pressure Range (Upto) | 25 Bar |
Packaging Type | Box |
Dial Shpae | Round |
Country of Origin | Made in India |
Crankshaft deflection gauges are used by service engineers, repairmen, crankshaft grinders, production supervisors, and quality control inspectors, crankshaft deflection gauges measure the web deflection of crankshafts in:
- Ready-to-operate engines or compressors.
- Assembled engines or compressors, with connecting rod in place.
- Assembled engines or compressors, with connecting rod removed.
- Dismantled crankshafts, between centres.
These Crankshaft Deflection Gauges are sturdy in design and furnished with hardened
gauging points.
They are ideally suited to rugged working conditions.
The Crankshaft Deflection Gauges are supplied in Sets consisting of a dial gauge unit
with spring-loaded (live) gauging point and a full set of gauging extensions
and fixed gauging points to suit ranges stated. The Sets come in fitted
hardwood cases.
Product Details:
Parameter | HRC |
Display Type | Digital |
Accuracy | +/-0.8% |
IP Rating | IP33 |
Hardness | HRC,HRB, HRA, HV, HB, HS and HL |
Power Source | Battery |
Mx Sample Hardness | 980 HV |
Model No | TH - 130 |
Test Tip | Tungsten Carbide |
Country of Origin | Made in India |
Product Details:
Accuracy | 2% |
Usage | Medical |
Warranty | 6 Months |
Response Time | 0.5 Seconds |
Type | Gun |
Target Distance | 5 cm |
Type of Display | LCD |
Color | Yellow |
Body Material | Plastic |
Display Type | Digtial |
Voltage | 210 V |
IP Rating | IP56 |
Power Source | Battery |
Frequency | 50 Hz |
Country of Origin | Made in India |
Non - Contact hand held battery operated safety & accurately measures surface temperatures in awkward hard to reach places . The gauge is factory calibrated & therefore no need to focus the instrument.Model No. 214. Range - 18 to 315 degree C. Resolution 1degree. Accuracy ± 2% field of view 3:1 optical ratio with a 25mm minimum target. Reapeatablity ± .5% of reading. Response in working 1 second and 9volts alkaline battery life 100 hours. Also checks Temperature of Painted Components coming from baking oven.
Additional Information:
Product Details:
Brand | Lutron |
Accuracy | 1.0 dB |
Display | LCD |
Calibration | Automatic |
Display Type | Digital |
IP Rating | IP33 |
Model No | SL-4001 |
Country of Origin | Made in India |
Product Details:
Accuracy | 1.5 DegreeC |
Power Source | Batteru |
Brand | PTC |
Display Type | Analogue |
Dial Shape | Round |
Packaging Type | Box |
Body Material | MS |
Country of Origin | Made in India |
| |||||||||||||||||||||||||
|
Additional Information:
Product Details:
Weight | 0.7 Kg |
Size | 150 x 70 x 5 mm |
Pattern | Printed |
Application | Industrial, Laboratory |
Packaging Type | Box |
Shape | Rectangle |
Country of Origin | Made in India |
Product Details:
Features | Plastic Lens |
Weight | 3 oz. (85g) |
Packaging Type | Box |
Diameter | 2.1 inch (5.3cm) |
Certification | NIST Traceable |
Temperature Ranges | 20 to +160 Degree F or 0 to 150 Degree F |
Display Type | Analogue |
Height | 0.9 inch (2.3cm) |
Country of Origin | Made in India |
Specifications and Dimensions | |
Accuracy | ±2% of Full Scale |
Diameter | 2.1"(5.3cm) |
Height | 0.9" (2.3cm) |
Weight | 3 oz. (85g) |
Certification | NIST Traceable |
Meets or Exceeds | Arema Specifications |
Features | Plastic Lens |
Accessories | Single or Max-Min Hands |
Temperature Ranges | 20°F to +160°F or 0°F to 150°F |