New Items

Product Details:

• A completely sealed, IP67 rated case
• Withstands drops up to 10 ft or 3 m (with holster)
• Dustproof per IEC 60529 IP6x
• Waterproof per IEC 60529 IPx7
• CAT III 1000 V, CAT IV 600 V
• Reversible holster for added protection of the display when not in use

Product Details:

Key Features

• Safety first. Connect the insulation tester then keep yourself out of harm's way by monitoring your test measurements remotely.
• Prove your job is done right by quickly seeing and sharing insulation resistance test results wirelessly with your smartphone.
• Quickly find problems by saving and comparing measurements over time on a wireless device.

Product Details:

HT-9600 has the function of measuring PM2.5, and PM10, counting dust particles, temperature, and humidity. The product is provided with high measurement precision, stable performance, simple operation, and convenience to carry. It is used in medical, electronics, precision machinery, CPT manufacturing, microbiological and other industries. It is suitable for the indoor environment of family, office, inside of cars and natural environment, etc.

The electronic sensors and microprocessors used on the product belong to the precision electronic device. The product must be kept away from water, fire, inflammable oil and gas or sites with strong electromagnetic interference to prevent influence on/damage to the device. Don’t block; or avoid strong air or hot air blowing to the air inlet for air sampling. Please use dry cloth to wipe the instrument case. Don’t use damp cloth or corrosive detergents. Don’t dismantle and remodel the product without authorization.

Main Features of HT-9600 Air Particle counter

• Simultaneously measure and display 3 channels of particle sizes (down to 0.3 μm), Air Temperature & Humidity
• Direct dust concentration numerical method
• Invasive electronic cutting technology
• Light scattering principle test accuracy
• Quick response test
• Pollution level representative color display
• Off effect high capacity lithium battery power supply
• Intelligent recognition automatic shutdown, maximum power saving
• Simple operation without maintenance
• Microprocessor control with advanced digital signal processing capability
• The dust ion is greater than or equal to 0.3um only Hyper sensibility
• Particle size ranges from 0.3 to 10um

Product Details:

Key features

• A completely sealed, IP67 rated case
• Withstands drops up to 10 ft or 3 m (with holster)
• Dustproof per IEC 60529 IP6x
• Waterproof per IEC 60529 IPx7
• CAT III 1000 V, CAT IV 600 V
• Reversible holster for added protection of the display when not in use

Product Details:

CEM DT9880 Particle Counter with unique 2.8 inch color TFT LCD display measures accurate readings for particle counter, Air Temperature, Relative Humidity, Dew Point, Wet Bulb Temperature. Air Quality Monitor can measure up to 6 channels of particle sizes use the included software to generate reports with videos, photos, and data points.

Applications: Clean Rooms,HVAC/R System Monitoring, Pharmaceutical, Transportation & Service Depots, Air Quality Monitoring, Power Generation (fossil fuel burning), Machine manufacturing, Charcoal-based heating/cooking, Traffic-related emissions, Cement Manufacturing, Mining, & Stone Crushing, Agro-Industrial (flour milling & agricultural field burning ), Metallurgy Processes (melting, pouring, torch-cutting)

Product Details:

Standard Features

• Runs on internal batteries (8 hour use) Auto shut-off after 10 min. of non-use
• Programmable High/Low setpoints with both audible beep and Green/Red LED indicator for uniform torque tightening or GO/NO GO testing
• Peak, Real Time, Peak Down and Continuous Output modes (selectable)
• Selectable units ozf-in, lbf-in, kgf-cm, N-cm and N-m
• USB virtual COM port sends peak (1 data) or continuous data (12 or 180 data/second)
• Statistics: number of data, Max, Min, Avg
• 800 data memory for recall or for SPC download
• Programmable screw tightening counter
• Programmable Auto Zero function resets unit to zero for easy operation
• Ergonomic and light weight, yet ruggedly constructed
• CEDAR DID-4A with 1/4″ square drive includes 1/4″ female square to 1/4″ hex adapter, 2-1/4″ Phillips tips, AC charger and carrying case. Optional ratchet (CW, CCW and fixed operation) and optional small Jacobs chuck (up to 2 mm dia.) available

Product Details:

• Highest voltage capability, measuring to 1500 V DC and 1000 V AC
• CAT IV 1000 V rated
• Special sealing for environment and water resistance: IP67 rated
• Constructed with drop-resistant housing and PCB mounting
• Magne-Grip™ holster, frees both hands for work
• Includes high voltage test leads with threaded alligator clips
• Display 3-1/2 digit LCD, 1999 counts, with annunciators
• Automatic polarity indication
• Low battery indication
• Standard 9 V battery, NEDA 1604, JIS 006P,IEC 6F2
• Flame retardant, high-impact thermoplastic case
• Resistance ranges 200 Ω, 2 kΩ, 20 kΩ, 200 kΩ, 2 MΩ, 20 MΩ

Product Details:

Description

• Measure solar irradiance, ambient and PV module temperature, array orientation and tilt angles
• Make instantaneous measurements to determine the watts per square meter solar irradiation, required by IEC 62446-1 standard
• High contrast LCD with large numbers for easy readability in direct sunlight
• Includes convenient carry case with shoulder strap

Product Details:

Key Features

• Large backlit dual display shows any combination of T1, T2 (52 and 54 only), T1-T2 (52 and 54 only), plus MIN, MAX, or AVG
• Recall function allows logged data to be easily reviewed on the meter display
• Infrared USB communication port allows data to be exported to optional FlukeView Forms® Temperature PC software for further analysis and graphing
• Data Logging up to 500 points of data with user adjustable recording interval
• Relative time clock on MIN, MAX, and AVG provides a time reference for major events
• Electronic Offset function allows compensation of thermocouple errors to maximize overall accuracy
• Measures J, K, T, E, R, S, and N-type thermocouples
• Readout in °C, °F, or Kelvin (K)
• Splash and dust resistant case protected by impact absorbing holster
• User-friendly front panel is easy to set up and operate
• Sleep mode increases battery life; typical 1000-hour battery life
• Battery door allows easy battery replacement without breaking the calibration seal
• Optional ToolPak accessory allows the thermometer to hang from any metal object (with the rare earth magnet) or secure around a pipe (with hook-and-loop straps) for hands-free operation
• 3 year warranty

Product Details:

SKF QuickCollect sensor kitThis sensor is an easy-to-use, Bluetooth-enabled handheld sensor that connects to apps that work with both iOS and Android tablets and smart phones. Combining vibration and temperature sensing, overall data can be viewed on the spot in real time or pushed to the cloud for future analysis. The sensor is ideal for service, reliability, operations, or maintenance personnel as part of a walk-around data collection program.

• Easy-to-use, handheld vibration and temperature sensor
• Requires minimum training and experience
• Provides instant feedback on vibration and temperature
• Enables early identification of developing rotating machinery issues
• Cost-effective and scalable entry-point for reliable rotation

Product Details:

A Heat Stress WBGT Globe Anemometer is a specialized instrument designed to measure the Wet Bulb Globe Temperature (WBGT) index, which assesses environmental heat stress on the human body. This index considers factors like air temperature, humidity, wind speed, and radiant heat from the sun, providing a comprehensive understanding of heat exposure risks.

Product Details:

Key features

• A rugged, compact insulation resistance tester for residential and commercial electricians
• Performs insulation tests from 0.01 MΩ to 2000 MΩ
• Offers two insulation test voltages: 500 V and 1000 V
• Includes live circuit detection to prevent insulation test if voltage >30 V is detected
• Measures resistance from 0.01 Ω to 20.00 kΩ

Product Details:

Key Features

• Single Input digital thermometer with data logging for lab, QA, process calibration, food safety and HVAC
• Logs up to 500 points of data at user adjustable recording intervals
• Measures J, K, T, E, R, S, and N-type thermocouples
• Presents results in °C, °F, or Kelvin (K) on a large backlit display
• Provides a recall function to easily review logged data

Product Details:

Key Features

• Measurement range: 0 to 260 °C
• One year warranty

Key features

• Measurement range: -40 to 816ºC
• One year warranty

Product Details:

Key Features

• Dual-input digital thermometer for lab, QA, process calibration, food safety and HVAC
• Shows any combination of T1, T2, T1-T2, plus MIN, MAX, or AVG on the large backlit dual display
• Features fast response and laboratory accuracy (0.05% + 0.3°C)
• Includes a relative time clock on MIN, MAX, and AVG to provide a time reference for major events